YD-5001000-2000 kgs per feed500 kgs per hour2-4 hours380V2.24KwNatural Gas or Diesel oilItaly BurnerManual22.0-40.0 Kgs/Hour20.0-45.0m3/Hour320 x 220 x 460cm (mainbody)257 x 147 x 108cm(Primary Chamber)4000Liters1500Liters500 Liters108 x 128cm14.0M13000kgsFirebrick ,Refractory Concrete400,000Kcal/Hr.Medical waste incinerator,approx. 0.4 cubic metres,diesel fuel / mains power operated,thermostatic temperature control,programmable cycleEmission Concentrations for IncineratorPollutant Incinerator Emission(Test conditions to be confirmed)Dust 76.7 mg/m3CO 67.5 mg/m3VOCSO2 9.5 mg/m3HCl 82.9 mg/m3HFNOx 153.9 mg/m3Hg 0.000041 mg/m3Cd 0.000010 mg/m3As + Ni 0.052 mg/m3Pb 0.359 mg/m3Cr+Sn+Sb+Cu+Mn 0.196 mg/m3Please confirm the following conditions that the emissions concentration are based onFlue gas exit temperature (°C) =% O2 in flue gas (wet and dry) =% H2O in flue gas =Emission velocity (m/s) =Internal stack diameter (m) =Actual volumetric flow/s (m3/hour) (i.e. at the actual temperature, moisture content and oxygen content and stating what those conditions are)Normalised volumetric flows (Nm3/hour) (i.e. normalisation conditions in terms of °C, %H2O and %O2)Emission limits (concentrations) that the incinerator has been designed to be achieve, stating the conditions that the concentrations relate toWhether a rain cap needs to be fitted to the stack
YD-500 Incinerator
Posted in Blog.